Analysis of the thermal properties of particle-reinforced aluminum composites

Loading...
Thumbnail Image

Date

2023

Authors

Petrović, Jasmina
Mladenović, Srba
Marković, Ivana
Stamenković, Uroš
Nedeljković, Milan
Mitrović, Milijana

Journal Title

Journal ISSN

Volume Title

Publisher

Fakultet Tehničkih nauka, Kosovska Mitrovica

Source

Zbornik izvoda radova - Jedanaesti simpozijum o termodinamici i faznim dijagramima sa međunarodnim učešćem, Kosovska Mitrovica, 23-24. jun 2023, 2023, 26-27

Volume

Issue

Abstract

In recent years, there has been a lot of interest in aluminum composites because of their improved mechanical properties, higher thermal stability, and lower weight than standard aluminum alloys. The thermal behavior of aluminum composites was examined during continuous heating, and thermal diffusivity and conductivity were measured. The experimental procedure involved the reinforcement of the aluminum matrix AN EW 6061 with ceramic particles Al2O3 to create aluminum composites. The reinforcer was used in size 80 um and three different fractions of 2 mas%, 5 mas% and 8 mas%. Stir casting was used to produce the composite. The thermal characteristics of solidified composite samples were measured using the flash method during continuous heating in a protected nitrogen environment at a heating rate of 10 °C/min. The thermal diffusivity and thermal conductivity values were found to be slightly lower compared to the matrix alloy. In addition, as the mass fraction of reinforcement in the composite increased, the thermal diffusivity values decreased, while the thermal conductivity values first decreased and then increased.

Description

Keywords

Citation

DOI

Scopus

ISSN

ISBN

978-86-81656-63-1

License

ARR

Collections