Experimental and thermodynamic study of isothermal sections at 600 °C and 400 °C of ternary Bi-Cu-Ge system

Milosavljević, Milan; Premović, Milena; Minić, Duško; Manasijević, Dragan; Đorđević, Aleksandar; Kolarević, Milan

Conference Object Open access M33

Proceedings_IOC_2021-180-183full.pdf (2.18MB)

2021

Milosavljević, Milan
Premović, Milena
Minić, Duško
Manasijević, Dragan
Đorđević, Aleksandar
Kolarević, Milan

University of Belgrade, Technical Faculty in Bor

Proceedings - 52nd International October Conference on Mining and Metallurgy - IOC 2021, November 29th - 30th 2021, Bor, Serbia, 2021, 165-168

165

168

English

M33 - Conference paper at an international conference, printed in full

Experimental and computation thermodynamic is very important for future development of materials and knowledge of phase diagram. Knowledge of phase diagram without experimental confirmation is not worth a lot. In this study both calculation and experiments were performed for better knowledge of isothermal sections. Calculated phase diagrams were two isothermal sections at 600 °C and 400 °C. Calculations were done by using PANDAT software and thermodynamic data from literadute. Experimental were performed on 12 annealed alloys. Six alloys were prepared per isothermal section. Compositions od alloys and phases presented in microstructures were tested with SEM-EDS while determination of phases in samples were checked with XRD. Results of EDS were compared with calculated isothermal sections and good agreement were reached.

ternary Bi-Cu-Ge system, SEM-EDS аnalysis, XRD аnalysis, isothermal sections

ISBN

978‐86‐6305‐119‐5

URI

https://ioc.tfbor.bg.ac.rs/public/2021/Proce...
https://repozitorijum.tfbor.bg.ac.rs/handle/...

dc.rights.license	CC-BY-NC-ND
dc.date.available	2023-12-26T09:21:52Z
dc.date.issued	2021
dc.identifier.isbn	978‐86‐6305‐119‐5
dc.identifier.uri	https://ioc.tfbor.bg.ac.rs/public/2021/Proceedings_IOC_2021.pdf
dc.identifier.uri	https://repozitorijum.tfbor.bg.ac.rs/handle/123456789/2690
dc.description.abstract	Experimental and computation thermodynamic is very important for future development of materials and knowledge of phase diagram. Knowledge of phase diagram without experimental confirmation is not worth a lot. In this study both calculation and experiments were performed for better knowledge of isothermal sections. Calculated phase diagrams were two isothermal sections at 600 °C and 400 °C. Calculations were done by using PANDAT software and thermodynamic data from literadute. Experimental were performed on 12 annealed alloys. Six alloys were prepared per isothermal section. Compositions od alloys and phases presented in microstructures were tested with SEM-EDS while determination of phases in samples were checked with XRD. Results of EDS were compared with calculated isothermal sections and good agreement were reached.
dc.language.iso	en
dc.publisher	University of Belgrade, Technical Faculty in Bor
dc.source	Proceedings - 52nd International October Conference on Mining and Metallurgy - IOC 2021, November 29th - 30th 2021, Bor, Serbia, 2021, 165-168
dc.subject	ternary Bi-Cu-Ge system
dc.rights.uri	http://creativecommons.org/licenses/by-nc-nd/4.0/
dc.subject	SEM-EDS аnalysis
dc.subject	XRD аnalysis
dc.subject	isothermal sections
dc.title	Experimental and thermodynamic study of isothermal sections at 600 °C and 400 °C of ternary Bi-Cu-Ge system
dc.type	conferenceObject
dc.type.version	publishedVersion
dc.citation.spage	165
dc.citation.epage	168
dc.citation.rank	M33
dc.creator	Milosavljević, Milan
dc.creator	Premović, Milena
dc.creator	Minić, Duško
dc.creator	Manasijević, Dragan
dc.creator	Đorđević, Aleksandar
dc.creator	Kolarević, Milan
dc.date.accessioned	2023-12-26T09:21:52Z


Experimental and thermodynamic study of isothermal sections at 600 °C and 400 °C of ternary Bi-Cu-Ge system	2


Proceedings_IOC_2021-180-183full.pdf	0