Leaching of flotation tailings with a solution of sulfuric acid and ionic liquid
Loading...
Date
2023
Authors
Marilović, Dragana
Bogdanović, Grozdanka
Petrović, Sanja
Journal Title
Journal ISSN
Volume Title
Publisher
University of Belgrade, Technical Faculty in Bor
Source
Proceedings - 54th International October Conference on Mining and Metallurgy - IOC 2023, 18-21 October 2023, Bor Lake, Serbia
Volume
Issue
Abstract
This paper presents the results of leaching flotation tailings containing 0.13% of copper and 4.22 % of iron. The experiments were carried out in a sulfuric acid solution (H2SO4) and an ionic liquid solution 1-butyl-3-methyl-imidazolium hydrogen sulfate ([bmim]HSO4). Concentrations of the reagents of 0.01 mol/dm3 and 0.05 mol/dm3 were tested. When leaching with sulfuric acid, the leaching degree of copper was 71.05% at the lower concentration of solution and 76.59% at the higher concentration of solution. When flotation tailings was leached in an ionic liquid solution with the same concentrations, the leaching degree of copper was 72.57% (for 0.01 mol/dm3) and 77.10% (for 0.05 mol/dm3), respectively. The results showed that the leaching rate of copper increased in the first 5-10 minutes of the reaction due to the presence of oxide minerals and then slightly increased with time. The dissolution of iron was <3% under the tested conditions. These results indicate that the ionic liquid 1-butyl-3-methyl-imidazolium hydrogen sulfate ([bmim]HSO4) can be used as agent for the leaching process of flotation tailings.
Description
Keywords
leaching, flotation tailings, sulfuric acid, ionic liquids
Citation
DOI
Scopus
ISSN
ISBN
978-86-6305-140-9
License
CC-BY-NC-ND